Reduce paint costs. Plus with better finishing.

Nitrotherm Spray system is an innovation that is changing spraying with in the aerospace, simulation and defence for the better.  It not only increases paint yields to reduce the costs of painting and coating but allows for a better quality of finish.
Nitrotherm Spray is a superior method to traditional spraying that also saves costs.  Replacing compressed air with ionised nitrogen for the fluid carrier, Nitrothem Spray provides a better faster application and finishing.

Flatter finish

Due to spraying at a reduced pressure, Nitrotherm creates less turbulence.  This reduces the number of dust and dirt particles reaching the paint to give you a higher quality finish with no polishing required (providing another cost advantage).

Nitrotherm Spray allows paint and coatings to be applied thinly, wet-on-wet.  This eliminates those common paint issues found in traditional methods such as running, sags, drips and the orange peel effect.

Coats can be applied in thin layers – for less airborne weight

A big advantage of the Nitrotherm Spray method is the ability to spray in thin layers. This creates
less weight and drag on airplane parts in flight which consequently translates into a significant saving in reduced fuel usage.

Save at least 20% on your paint costs

With superior adhesion Nitrotherm Spray produces less overspray, so that means less wastage and cleaning maintenance time for your booths and booth filters. Together with more rapid drying it speeds up production with a:A big advantage of the Nitrotherm Spray

  • 50% reduction in application time

    reducing the presence of dirt and dust in the finished coating

  • Greater throughput

  • Increased paint yields

  • Saving of up to 20% in paint material costs


Consistent finishing with no climate control needed

In addition it allows paint viscosity to be the same regardless of fluctuations in humidity, temperature or climatic conditions.  This ensures your production outputs at a consistently high quality standard.


Use the calculator below to see what you could be saving each month


Please enter your monthly paint spend.

Reduce VOCs

The spraying system, thanks to better ahesion produces less overspraying. This in turn cuts the need for solvents to reduce your VOC emissions help meet your environmental obligations.

Easy integration

Nitrotherm is an easy add-on system that can be used with any type of spray gun, robotic system or spray booth.

Watch now

Aerospace Spraying Benefits:

  • Reduce wastage from overspraying
  • Speed up application time
  • Increase paint and coating coverage
  • Increase your productivity
  • Cut your paint cost
  • Get superior coating finishes
  • Spray and coat in thin layers to reduce airborne weight and associated costs
  • Reduce VOC emissions

Complete installation and training

We will install your Nitrotherm Spray equipment within just 1-2 days, avoiding any inconvenience to your daily business.  User training is also provided in an intensive 3-day programme.


Want to see how Nitrotherm works? Book a demo and see this revolutionary system in action at our Northampton premises.



To request our latest brochure click the button below.